FLUX CORED ARC WELDING WIRES

ELCOR R 71
( E 71T-1C-J )

Provides high mechanical properties, proper, smooth, X-ray safety seams, It is economical as it has high melting ability and can work under high current in all positions, Shielding gas : %100 CO2

ELCOR R 71 CM
( E 71 T-1C/-1M )

Rutile type flux cored wire which is used for the production welding of machine and welding applications on ship, and steel constructions in all positions. Provides high mechanical proper ties, proper, smooth, X-ray safety seams, It is economical as it has high melting ability an...

ELCOR R 71 SC
( E71 T-1C/-1M H4 )

Rutile type flux cored wire which is used for the production welding of machine and welding applications on ship, and steel constructions in all positions., Shielding Gas: CO2 or M21, It is economical as it has high melting ability and can work with high current in all positions....

ELCOR MR 70
( E 70 T-9 C J H8 )

Metal-Rutile type flux cored welding wire, High fill rate and deep penantrant, Suitability flat and horizontal fillet weld, Excellent notch toughness value at low temperatures., Shielding Gas: CO2

ELCOR B 70
( E 70 T-5 M J )

Used for semi-automatic or fully automatic welding of alloyed or unalloyed construction steels, thin-walled steels, it has soft arc, deep penetration, good bead features, lmpact strength values are higher than those of E71 T-1 in at low temperatures, M21 gas is used for shielding

ELCOR B 70 SC
( E 70 T-5C/-5M H4 )

ELCOR B 70 SC is high-basicity flux-cored wire, Extremely crack resistant weld metal conditioned by the basic slag, High mechanical properties are easily obtained when used in single-sided welding operations using a ceramic back-up, Weld has X-ray quality with low spatter formati...

ELCOR B 70-ARM
( E 70 T-5 M )

Suitable for use in welding of Armco lron and mild steels. Applicability in welding of galvanized tanks made of Armco Iron, Suitable for automation, Shielding gas: M21

ELCOR M 70
( E 70 C-6 M )

Shielding gas M21, Suitable for butt and fillet welding. Better arc stability and wider optimum current range for spray transfer arc with less spattering than solid wire

ELCOR M 70 SC
( E 70 C-6 M H4 )

Good arc restriking even with cold wire tip, suitable for robot applications, Multi-pass welding without in-between cleaning, Ideal for use in the field short arc and spray arc, Excellent gap bridging for root welding, Typical applications are shipbuilding, steel and pressure ves...

ELCOR M 80 Ni
( E 80 C Ni 1 )

Suitable for automation welding applications, It is metal cored wire, It has soft arc, deep penetration, good bead features, Suitable for butt and fillet welding, Shielding gas : M21 (Ar+%5-25CO2)

ELCOR R 81 Ni
( E 81 T1-Ni1 C )

Rutile type flux cored welding wire with good toughness in mild and 490-550 MPa high tensile steels at low service temperatures, Suitable for butt and fillet welding in all positions, You can get smooth arc, and low spatter, good weldability, Shielding Gas: CO2

ELCOR R 81 Ni SC
( E 81 T1-Ni1 C,Ni1 M H4 )

Micro-alloy rutile flux-cored wire with rapidly solidifying slag for CO2 and Ar+CO2 mix., Excellent weld puddle manipulation, superior all-position welding, Using temperature up to -60°C, Particularly suited for MAG orbital welding applications and all-positipon welding on cerami...

ELCOR R 91
( E 91 T1-K2CJ )

Rutile type flux cored wire for 550-620 N/mm² high tensile strength steel for low temperature service, Suitable for butt and fillet welding all positions, Excellent impact value at low temperatures down to -40°C, Shielding gas: CO2

ELCOR R 91 SC
( E 91 T1-K2C,K2M H4 )

Rutile type flux cored wire for expecially 550-620 N/mm² high tensile strength steel at low temperature service, Suitable for butt and fillet welding all positions, Excellent impact value at low temperatures down to -40°C, Shielding Gas: M21 or CO2

ELCOR R 110
( E 111 T1-GC )

Rutile type flux cored wire which provides an exceptionally smooth and stable arc, low spatter., Applications of single and multipass welding of high strength low alloy steels such as HY-80 and HY-100, Shielding gas: CO2

ELCOR R 110 SC
( E 111 T1-GC,GM H4 )

ELCOR R 11O SC rutile type flux cored wire which provides an exceptionally smooth and stable arc, low spatter, Applications of single and multipass welding of high strength low alloy steels, such as HY-80, and HY-100., Shielding Gas: M21 or CO2

ELCOR M Ni2 SC
( E 80 C-Ni2 H4 )

Good arc restriking even with cold wire tip, suitable for robot applications, Ideal for use in the field short arc and spray arc, Excellent gap bridging for root welding, High-efficiency type for economic production, Shielding Gas: M21

ELCOR M NiMo1 SC
( E 90C-K3M H4/E 91 T1-G )

GeKa ELCOR M NiMo1 SC is a metal type flux-cored wire., Good arc striking even with cold wire tip, suitable for robot applications: Multipass welding without in-between cleaning: Usable in the field short arc and spray arc: Excellent gap bridging for root welding: High-efficiency...

ELCOR M NiCrMo SC
( E 110 C-K4 H4 )

ELCOR M NiCrMo SC metal cored wire without slag for Ar+CO2 mix is a metal cored wire which provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage, Shielding Gas: M21

ELCOR R 81 NiCu
( E 81 T1-W2C )

Rutile flux-cored wire, Typical application is weathering grades of steels, Excellent weld puddle maniplation, superior all-position welding, Particularly suited for mechanized MAG welding and all-position welding on ceramic backing, Low spatter with easy slag removal, Shielding...